When Choose Non-Woven (Standard) MGO Board?

✅ Factory-Finished Smooth Surface
Fresh out of production, the front face boasts a naturally smooth texture (Ra ≤ 5μm) requiring no sanding or priming. Ideal for quick installations in partitions, ceilings, or utility spaces where aesthetics take a backseat to functionality.

✅ Reinforced Fiberglass Backbone
Embedded non-woven fiberglass mesh enhances flexural strength (up to 16 MPa) while preventing cracks from thermal shifts or structural movements.

✅ Dual-Surface Versatility

Front Side: Smooth finish for direct paint, wallpaper, or thin-set adhesives.

Back Side: Slightly textured grip (Ra ≈ 30μm) improves bonding with mortar or plaster.

✅ Zero Post-Production Waste
Unlike sanded boards, our standard panels skip energy-intensive grinding, reducing carbon footprint by 22% per square meter.

✅ Budget-Friendly Performance
Save up to 15% vs. sanded boards without sacrificing fire safety (Class A ASTM E84) or moisture resistance (<0.5% water absorption).

Applications

· Backing Boards: Walls, ceilings, and soffits needing hidden structural support.

· Tile Underlayment: Textured back bonds securely with thinset mortar in dry areas.

· Fire Barriers: Unmodified surface meets 1-hour fire ratings in duct enclosures.

· Temporary Structures: Reusable panels for event booths or pop-up clinics.

Specifications

· Thickness: 6mm (1/4"), 9mm (3/8"), 12mm (1/2")

· Density: 1,000–1,100 kg/m³

· Flexural Strength: 14–16 MPa (ASTM C947)

· Thermal Conductivity: 0.18 W/m·K

· Certifications: CE, CARB Phase 2, ISO 14001